外环
2.The system design variables are magnet external diameter of internal ring, internal diameter of external ring, depth of groove - ring and ampere turns.
3.Synthesis and Crystal Structures of exo-Polyhedral Cyclized Nickelaundecaborane Clusters
4.The flight state variables are separated into fast and slow variables in terms of perturbation theory.
5.The speed of electric transmission of ship lift is governored by the transist motor and its lifting mechanism of control system is a double closed ring regulation system of inner electric current ring and outer speed ring. It is driven by 4 DC motors with the power of 200 kW each and the total lifting capacity is 320 t.
6.In this paper,the load acted on the outer ring of flexible bearing and on the ball has beensolved on the premise that it is considered that the flexible wheel and bearing effect distor-tion under the action of outer loading torsion on harmonic gear drive. According to thesolved load and with formulas concerned and theorems,the analysis has been made of allkinds of stress on the outer ring of flexible bearing and the conclusion more suitable for re-ality has been obtainde.
7.The external loop is to control the DC(Direct Current) capacitor voltage. A single neure adaptive PI(Proportional Integral) control is adopted for the voltage control,which adapts itself to online system parameter changes for avoi￣ding disturbances and keeping capacitor voltage almost constant during instantaneous reactive power exchange.
8.The one-million-second image shows a bright outer ring (green) ten light years in diameter that marks the location of a shock wave generated by the supernova explosion.
9.The shear stress on outer ring wall(τ_(ow))is less than that(τ_(iw))on inner ring wall. τ_(iw)/τ_(ow) depends on the(ratio) of the outer ring radius and the inner ring one.
10.The experimental results show that the distribution of the radial static pressure behind the model cascade can be controlled by changing the diameter, number and distribution of the holes at different radius of the full circled backboard with the holes properly， and the experiments variable enthalpy drop in the model cascade can be realized by using out-circled backboard or in-circled backboard which are set on the different distances from the trailing edge of the model cascade.
