注量
3.To measure relative neutron-flux distribution in the core of SPRR-300 by use of activating method
4.Measurement of absolute thermal neutron fluence rate in wide range with muscovite track detector
5.THE ABSOLUTE MEASUREMENT AND INTERNATIONAL INTER-COMPARISON OF 0.1～18 MeV MONOENERGETIG NEUTRON FLUENCE RATE
6.ERL(effectiveness of resin loading)of phenol resin aqueous solution was 10% under soaking condition at atmosphere, but it increased to 90% under the vacuum condition whether or not the specimens were extracted.
7.Methods 31 severe patients were involved in study, whose blood glucose (BG) was over 16.6mmol/L. Insulin pump was used to adjust the BG under peripheral blood glucose.
8.The results show that high defect density appears during RTA when As is implanted to a dose of 5×10~(16)cm~(-2).
9.After synthetically analyses and researches of the existing methods for injection allocation rate, this article takes the group of water-injecting wells in waterflood oilfield as the research unit, the multiple regression method to decide the injection allocation rate is applied, by which and its regression coefficient and partial correlation coefficient, the multivariate regression models of Model Ⅰ and Model Ⅱ are developed.
10.The proper injection allocation rate of well can effectively relieve the contradictions of plane, interlayer and inherent layers, and improve the effects of oilfield exploitation by waterflood or water drive process.
