电铸
2.Experimental results indicate that pulse current causes denser deposit, which leads to the decrease of EDM tool wear ratio.
3.Stencil manufacturing techniques include chemical etching, laser cutting and electroforming.
4.With the Ni-Co electroforming process recommended, deposits with hardness≥752Hv, tensile strength≥1533N/mm~2, elongation≥2.8% and erichsen number≥4.3mm can be obtained.
5.ELECTROFORMING TECHNOLOGY OF INJECTION MOLD CAVITY WITH THE ORIGINAL PLASTICS PRODUCT AS MOLD CORE
6.DEVELOPMENT AND TESTS OF LOW-TEMPERATURE ELECTROPLATED81/2" PDC CORING OIL BITS
7.Characterisation of nickel sulphamate electroforming solution using rotating cylinder Hull cell
9.The friction and wear tests of composite layers were also carried out. It is found that the concentration of embedded La2O3 particles reaches up to 3.1 wt% and the codeposited-La2O3 content in the composite deposit is markedly affected by the La2O3 particle concentration in the electrolyte and then the current density.
10.A metal plate used in letterpress printing, made by electroplating a lead or plastic mold of the page to be printed.
