脉冲变压器
2.In order to study the feasibility of the HTS air-core pulse transformer, a model of air-core pulse transformer with five superconducting double-pancakes is build.
4.For the circumfluence, the experiment results partially match the expectable results, which gives some references for HTS air-core pulse transformer design.
5.Fe79Si3.5B15.5C2 amorphous alloy for pulse transformer has been investigated. The Fe-based amorphous alloy is a good core material for large power pulse transformer.
6.This paper summarized the development of the main components of pulse power source, based on MIL-DTL-23659D, the test requirement for pulse power source and firing performance of exploding foil initiator(EFI) were proposed. And the research of low energy explosive foil initiator(LEEFI) is analyzed.
7.This article introduced the principles of cold cathode crowbar-tube used in test of pulse modulator and CW microwave tube.It can discharge the energy on the reserved capacitance in a very short time to ensure the safety of the traveling wave tube or the multibeam klystron.Two basic circuits of the pulse transformer spring mode and self-spring mode are also presented.
8.Washing machine electric water-heater,microwave oven,inducion cooker,fridge,intelligent tool,electromo-bile,pulse combustion,etc that include kinds of intelligent microcomputer control board,cable joint,printed circuit board,filter,IC controller,voltage changer,inductor,noise rejector and so on.
9.There are two methods of detecting the winding deformation faults in power transformer, the Low Voltage Impulse method (LVI) and the Frequency Response Analysis method (FRA).
