爱词霸英语   汉语   手机版   软件版下载 | English
每日一句:正在加载...
1.The Experimental Research of Water Ingress in HTR Core
球床堆水的实验研究收藏指正
2.steam Rankine cycle is ripe power cycle for nuclear heating reactor with smaller temperature dif- ference between reactor core input and output;
水蒸汽朗肯循环对于堆、出口温度差较小的堆型具有明显的优势;收藏指正
3.Design of the Multi-Position Progressive Die for the Bent Iron Core
弯曲铁多工位级模设计收藏指正
4.Design of Progressive Die for the Automatic Tinertoy of the Motor Stator & Rotor Core
电机定转子铁自动叠铆级模设计收藏指正
5.The design of the multi-position progressive die for the bent iron core was introduced from the aspects of the layout of the bent core, the structure of the die and the design of the main parts of the die.
从弯曲铁的排样、模具结构、主要模具零部件设计等几方面介绍了弯曲铁多工位级模的设计收藏指正
6.The study in the dissertation briefly introduces the classifications and the advances of ring rolling mills and has taken an insight into the cold ring rolling mill with type of D56G90. The structure and capability of the cold ring rolling mill with type of D56G90 are expounded and the 3D CAD models of the spindle assembly, mandrel, guide roll, main block, feed system, main drive, manipulator, machine tool bed, and the whole machine tool are proposed.
本文简要介绍了轧环机的分类和国内外研究现状,以D56G90型冷轧环机为对象,对该设备的结构和性能行了研究。 在介绍该轧环机结构特点的基础上,基于三维CAD软件Pro/ENGINEER,建立了主轴部件、辊部件、导向辊部件、主滑块部件、给系统、主传动部件、机械手部件、床身部件及整体设备的三维CAD模型。收藏指正
7.The latest singlechip PIC16F876 and PIC16F877 of the Microchip C ompany of in the United States is used to the untouched switch control. The met hod of themodularization design is used to realize primarily timed accurate turn , turn over, brake control, measure and feedback control.
采用美国微公司(MIROCHIP)的最新单片机PIC16F876和PIC16F877,运用模块化设计方法,实现对步梁传动电机适时准确的正转、反转、制动和监测反馈控制。收藏指正
8.The results were showed, the optimum ratio of Gum Acacia and Maltodextrin 1:1,the optimum emulsion 0.4%, the optimum concentration of solid matter 40%, the optimum ratio of cinnaldehyde to wall material V∶m=1 mL∶10 g. The optimum processing conditions were as follows: inlet-air temperature 225 ℃,inner-speed of mixture 210 mL/h,air pressure of ejector 180 kPa.
实验结果表明 ,阿拉伯胶和麦芽糊精的最佳配比为 1∶1,蒸馏单甘酯的用量 0 .4 % (质量分数 ) ,固形物质量分数为 4 0 % ,材与壁材的配比为V∶m =1mL∶10g,喷雾干燥最佳工艺条件为 :风温度 2 2 5℃ ,料速度 2 10mL/h ,喷射压力 180kPa收藏指正
9.But according to coupled modes diffusion theory,2n bright loops that are adjacent to the n bright loops corresponding LP_(0n) modes will couple into LP_(0n) modes,then be absorbed.
但根据耦合模扩散理论,与LP0n模对应的一组亮环最邻近的2n个亮环所携带的功率能耦合LP0n模,被纤吸收。收藏指正
10.d-Limonene microcapsules were prepared by dry spraying method. The optimal conditions obtained by the orthogonal test were: entering wind temperature 200℃; the ration of internal to external capsule 1∶50, β-Cyclodextrin:Arabic gum:Gluose syrup 2∶3∶5;
以β-环糊精+阿拉伯胶+玉米糖浆为壁材,采用喷雾干燥对柑橘萜油行微胶囊化,通过正交试验,确定出包裹柑橘萜油的最佳工艺条件为:风温度200℃,出风温度75℃,材∶壁材质量比为1∶50,β-环糊精∶阿拉伯胶∶玉米糖浆质量比为2∶3∶5。收藏指正
尝试查询