基本释义
n.
硼化物
相关例句
boride
1.Using in situ formation of ternary boride base cermets hard phases through chemical reactions and sinterbonding onto steel substrates though liquid sintering we successfully prepared a kind of ternary boride base cermet.
2.The results show that the as-cast structures of Fe-B-C alloy consist of the pearlite,the ferrite,the martensite,and the boride (Fe2B). The Fe2B boride is continuous network and is distributed along the grain boundary.
3.Study on the Abrasion Behaviour of 65Mn Steel by Convenient Heat Treatment and 45 Steel Boride Layer
4.M. H. Rei, L. L. Sheu, and Y. Z. Chen, “Nickel Boride Catalyst in Organic Synthesis. I: A New Ferromagnetic Catalyst from the Diborane Reduction of Nickel Acetate”, Appl. Catal., 23 (1986) 281.
5.The properties such as high hardness,excellent properties of abrasive resistance,corrosive resistance,physical and mechanical of ternary boride cermets are introduced briefly (also tested,analysed and discussed)here.
6.Qinghai Ridge Boron &Lithium Co., Ltd, certificited in 2000, is a aggregate resource corporation of mining boron mine, producing boracic acid, boride re-processing and selling Industrial used salt.
7.The experimental results show that the microstructure of hardening layer consists of acicular martensite, retained austenite, graphite in fake and boride, and hardness distribution along depth of hardening layer is unhomogeneous.
8.The result shows that with adequate salt composition and processing,parameter,the ideal boronaluminiling layer can be obtained,the anti-oxidation and hot fatigue resistance of which are superior to the boride layer,and the service life of gear blank die would be obviously elongated.
9.Alloy elements are combined with substrate to form dentate boride. It is found that the dentate structure is composed of B and other alloy elements and located between Fe_2B grain and adhere to the Fe_2B grains.
10.It was found that the surface layer was FeB and the inner was Fe2B. There was an abnormal structure with microbardness of about 300~500HV0.1 existing in the boundary seam between boride needles.