• 基本释义

  • 常见搭配

1.PHARYNGOG ASTRO-ANASTOMOSIS FOR CICATRICIAL STRICTURE OF PHARYNX-ESOPHAGUS RESULTING FROM CAUSTICITY:Report of Three Cases
胃咽吻合治疗咽及食管腐蚀性疤痕狭窄收藏指正
2.Properties: White powder with Specific Gravity of 7.10, easily absorb moisture, without flammability and causticity.
物理性能:白色粉末,比重7.10,易吸湿,无可燃性和腐蚀性收藏指正
3.Outer frame is used advanced digital controled creased bend pipe reduction board machine,impacting processing industry, galvanized board, strong causticity resistance.
外框采用先进的数控折弯机、数控减板机以及数控冲床加工工业,特厚镀锌板,抗腐蚀性极强。收藏指正
4.Through the combination of FDM prototyping, Nickel electroless plating, pulse current Nickel electroforming, and Zn-Al wire-arc spraying, mould cavities with high mechanical performance and causticity-resistant can be rapidly manufactured.
最后结合FDM快速原型的特点,通过对其化学镀镍和电铸镍,得到具有良好机械性能和耐腐蚀性能的模具型腔,然后组合使用电弧喷涂Zn-Al伪合金和环氧树脂浇注,对模具型腔进行背衬加固,实现注塑模的快速经济制造。收藏指正
5.Main material: The major components of DF single disk filter are divided into two types according to their causticity: (1) general corrosive medium, such as 304,316L stainless steel; (2) strong corrosive medium, such as combination of carbon steel lining and non-metal materials.
主要材质:本机采用的主要材质,根据介质的腐蚀性可选用:(1)一般腐蚀介质,可选用304,316L不锈钢;(2)强腐蚀性介质可选用碳钢衬胶及非金属组合。收藏指正
6.Main material: The major components of rotary disk vacuum filter are divided into two types according to their causticity:(1)304,316L stainless steel;(2)combination of carbon steel lining and non-metal materials;(3)strong corrosive medium, such ascombination of titanium material and non-metal materials.
主要材质:本机所用主要材质,根据介质的腐蚀性可选用:(1)304,316L不锈钢;(2)碳钢衬胶及非金属组合;(3)对于强腐蚀介质选用钛材及非金属组合。收藏指正
7.Main material: Components:The major components of this model are devided into three types according to their causticity: (1)304 or 316L stainless steel;(2)carbon steel;(3)combination of carbon steel lining and non-metal materials.
主要材质:本机型采用的主要材质根据介质的腐蚀性可分别选用:①304或316L不锈钢;②碳钢;③碳钢衬胶及非金属组合。收藏指正
8.The research is mainly divided into two part first NiO-NiFe_2 O_4 based anode material was made by the making craft system of the cermet and its figure from column to plank and enlarged and its spec is (160×100×10) mm To the physical volume density pore rate of the material bear causticity and so on carried on a measurement.
研究分为两大部分首先采用金属陶瓷的制备工艺制取NiO-NiFe_2O_4基惰性阳极材料试样形状经历了由圆柱形到板状并且扩大化,得到规格为(160×100×10)mm的试样材料,对材料的体积密度、气孔率、耐腐蚀性等性能进行测定。收藏指正
尝试查询