• 基本释义

1.On the basis of considering all round the relationship between extreme value and maximum value of pressure angle α, a curve,which shows that the pressure angle α max , varices with the initial angle ψ 0 and centre distance a, has been found, thus a kind of method for determining the initial angle of oscillating rod according to the least maximum pressure angle and a further determination of other basic dimensions has also been found.
在全面考虑压力α的极大值和最大值关系的基础上,找到压力αmax随初位ψ0和中心距a变动的曲线,从而找到了一种按最大压力最小来确定摆杆的初位,并进一步确定其它基本尺寸的方法。收藏指正
2.For this reason,he gives out the method to determine the position of movement limit,and he draws the conclusion that the top and down centre position of CYJ10?3?37HB pumping unit under the given conditions is where the crank angle is 178°7′3″ and 358°2′37″.
为此,给出了确定悬点运动死点位置的方法,并计算出CYJ10-3-37HB型抽油机在给定条件下的上、下死点位置为178°7′3″和358°2′37″曲柄转收藏指正
3.As amatter of fact, the burden flow released from bell did not move along thedesigned bell angle but along a slightly larger angle, and the centre of burdenflow was not at the half point of burden travel in bell but slightly lower.
实际料流在运动中离开钟面的角度不是大钟角度,而是要大些,料流的中心不在大钟行程的 1/2处,而是要稍低些。收藏指正
4.According to the angle of different well array and fracture , we have determined two kinds of infill manners of "3. 2 1" and "triangle centre of gravity" .
根据不同井排与裂缝夹,确定了“3、2、1”和“三形重心”两种加密方式。收藏指正
5.It builds a relative coordinates based on the jumping-off point of circular interpolation as its origin, caculates the sine and cosine of the angle formed by X axis and the line which connects the origin and the centre of the circle, then gets the coordinates of the centre in the relative coordinates, and enduces a uniform fomula, which is easy to program in computer.
摘要用圆弧插补起点作为相对坐标系原点,连接圆弧起点和圆心,求出该连接线和相对坐标X轴的夹的正/余弦值,由此解出圆心在相对坐标系的坐标,并得到一个统一的计算公式,易于计算机编程实现。收藏指正
尝试查询