circulation method
2.Single Crystal Growth of Synthetic Emerald by Flux Circulation Method of Temperature Gradient in Used Natural Beryl
3.The construction method, equipment and bore hole wall protection technology of the 100m long bored pile are described, with the analysis on the feasibility of suction reverse circulation method, balled bit problem in seriously weathered layer and technical measures for solving the problem presented
4.APPLICATION STUDY OF THE CIRCULATION ENZYME RATE METHOD IN BIOCHEMICAL ANALYZER FOR SERUM TBA DETECTION
5.Method: Enzyme rate determination, enzyme circulation and colorimetric method were used to determine the activity of serum Alamine aminotransferase (ALT) and the content of total Bilirubin(TBiL), total Bile Acid(TBA) in the patients and monoclonal fluorescence polarization immunoassay (FPIA) was used to analyze the whole blood CsA concentrations.
6.In order to cleaning up the residue bringing by slewing construction,adopt slurry to wash the scruff in positive circulation craftwork,this method has strict demand of slurry thickness and density, and can easily make the bottom of bore have overfull residue and mud peel,all these would make bearing capacity reduce.
7.Abstract In this article, the authors treated 20 cases glossodynia with blood circulation promoting and stasis removing method, using a cross-over design. The results showed that 13 petients completely remitted,5 caes patients marked benefit and 2 patients had no change.
8.In this paper, the noninterference movement condition of the cages of vertical circulation parking equipment is established, and the method for the chain transmission system design according to the condition is presented.
9.In addition,the hydrodynamic characteristic of one of the boiler with natural circulation is calculated and analyzed by both of the loop analysis method and the Hydrodynamic Calculation Method for Hot Water Boiler(JB/T8659-1997),which validates the correctness of the loop analysis method.
10.The coal based directly reduced iron (DRI) production technologies such as the rotary kiln,floating bed of circulation,rotary hearth furnace and carbon covered open fired method (COF) are introduced. The prospect and respective merits as well as defects are presented.
