基本释义
常见搭配
相关例句
corrugation
4.Bubble water is too long, skin absorbed moisture and expand, change so corrugation knits.
5.Small performance hall: the whole performance platform is nearly surrounded by audience. The irregular corrugation of inside wall prevents the focus of sound wave. Audience will share the common space.
6.If the satellite has a tilted orbit, the result is a series of vertical bending waves, an out-of-plane corrugation—small ripples in a cosmic carpet.
7.Brand damping corrugating tube compensator and flexible metal tube are new products put forward by Tianshou Technology Institute.Based on practical experiences and international advanced technology,and optimizing corrugation flexibility and rubber damp,the daming sand compensationg devices can be widely used n ships,air conditioner pamp,fire fighting pump,water supply pump.input and output of moter.It can effectively absorb damping and noise,lower epicenter spread,protecf equipment,prolong use of equipment.
8.Because of the thin wall and relatively long diameter, it is easy to cause the phenomena of destabilization,corrugation,and dehiscence, moreover, there are many influential factors of general spinning technology with the complex relations,hence, it is difficult to carry out the improvement and promotion work in the quality of end products and process control, just depending on the trial methods to study the spinning problems of the Titanium alloy collar rim of the lunar rover.
9.In this dissertation, the ANSYS/LS-DYNA software is applied to carry out the elastic-plastic finite element numerical modeling in the spinning process of the Titanium alloy collar rim of the lunar rover to get the stress-strain distribution rule, deforming flowing rule, and wall thickness distribution rule in the different periods of the spinning formation stage, and later preliminarily analyze the mechanism of production of the destabilization, corrugation, and dehiscence.
10.Abstract: In order to eliminate the product defects such as deformation,corrugation and rupture,the authors put forward the principle of flow rate uniformity for the design of rubber and plastics profile extrusion dies.On the basis of this principle and through the rheologic analysis of some actual cases,the design procedure is demonstrated.