爱词霸英语   汉语   手机版   软件版下载 | English
每日一句:正在加载...
1.Be able to understand the cutting clearance with different die, and calculate the cutting clearance with the different thickness of the material.
能理解不同模具的切刀间隙，并根据不同的材料厚度计算出切刀间隙。收藏指正
2.The Design of Clearance Hole in the Circular Screwing Die
圆板牙容屑孔的设计收藏指正
3.Rules to determine the clearance of die cavity, the length of flat portion of flow passage, and the way of supplying material to the inner ribs are formulated to guide the design of extrusion die.
为了保证挤出模设计的准确性，提出了口模内筋间隙的设计原则、内筋流道成型段长度的设计原则以及内筋供料方式的智能选择。收藏指正
4.The results also showed that for high cereal formula feed, the optimum conditons are as follows: moisture content is 15%～16%, clearance between rolls and die is 0.7mm, the aperture ratio of die (L/d) is 10.
对于含谷物高的配合饲料,制粒的适宜条件是:调质入模水分为15%～16%,辊模间隙为0.7mm,压模孔长径比(L/d)为10.收藏指正
5.In this paper, it was mainly studied the influences of main parameters on flow field in the screw die, including the distance between the damp zone and the screw, the calibration length, the lead of the screw, the width of the screw flight, the boot diameter of the screw, the structure of the screw end, the section area of the side pass, the clearance of the damp zone, etc.
本文主要研究了阻尼区离分配螺杆距离的远近、口模定型段长度、螺杆导程、螺杆螺棱宽度、螺杆末端根径、螺杆末端结构、旁路口流通截面大小、阻尼区的间隙的大小等的变化对螺杆分配机头内流场分布的影响。收藏指正
尝试查询
汉英释义