end point control
1.DEVELOPMENT OF THE DYNAMIC Mn & P END POINT CONTROL TECHNOLOGY FOR BOF STEELMAKING
3.The industrial experiment showed that end-point [O]、[C]×[O]、the content (FeO) of final slag and (TFe) of final slag were decreased under the same of end-point control after the technology of combined blown was put into production in CISC.
4.By adopting the BOF-LF-CC process to trail-produce 20CrMnTiH-1 automobile gear steel,the propriate inner controlling has been formulated,as well as the processes of the BOF end-point control,deoxidization for producing the white slag in LF and pouring with all protection at the low overheating temperature etc.
5.Hence, we propose CCM(Correlative Control Mechanism)that is a multilayered security protection mechanism based on VPN gateway incorporating client end-point, firewall, IDS and internal services.
9.Based on the monomer distribution balance of VC in vapor, poly(vinyl chloride)-rich, monomer-rich, water and CPE phases, an equilibrium model relating temperature, pressure, content of chlorinated polyethylene (CPE) and vinyl chloride (VC) conversion for CPE-VC suspension-swelling graft copolymerization is proposed This model can be used to determine VC conversion at the pressure drop point (Xf) and conversion beyond the pressure drop, and thus to control the end of polymerization.

