爱词霸英语   汉语   手机版   软件版下载 | English
每日一句:正在加载...
1.The two-tier end-to-end dynamic scheduling model is put forward, and its implementation and performance test are given out.
作者此提出了一个端端的两层动态实时调度模型,并给出了其具体实现和性能分析。收藏指正
2.6. A very long burst read and combined write scheme on PCI bus is proposed to achieve maximized PCI performance Test results show that end-to-end bandwidth is about 175MB S in single-net system and over 300MB S in double-net system The performance of HVIA-Net is Endsville compared with current high performance commodity network in the worldHVIA-Net has successfully been used in galaxy super server
实际系统测试结果表明,单网点-点带宽达175MB/s以上,双网点-点带宽达300MB/s以上。 与目前国际上的高性能商用网络相比,HVIA-Net的性能是领先的。收藏指正
3."The simplest way to put an end to all of this is a DNA test, but it has been refused," said Roy-Henry. "So I have deduced that there is something to hide."
罗伊·亨利说:"得结论的最简单方法就是进行DNA测试,但是已经遭拒绝,所以我断定这里一定有些事被隐瞒了。"收藏指正
4.The test puts an end to the problems of the conspicuous contradictories among layers,lowly-producing profile and low recoverable reserves of water-drive in heterogeneous stratified reservoir,the goals of subdividing a series of strata,infill drilling,high-rate development and EOR with few wells are achieced.
该方法从根本上解决了非均质多油层油田层间矛盾突出、剖面动用状况差、储量水驱动用程度低等问题,实现了用较少的钻井达细分层系、加密井网、高速开采、提高采收率的目的收藏指正
5.The use of a mobile phase containing an ion pairing reagent makes it compulsory to rinse the entire chromatographic system with ultra-pure water at the end of the test and to purge the injector during this rinsing operation.
使用含离子对试剂的流动相时,检验结束后必须用超纯水淋洗整个色谱系统,并在淋洗时清洗进样器。收藏指正
6.Key test is at end when he tries to model response variance.
关键测试是他试图答案的差异设计一套模式。收藏指正
7.The comparative cutting test using OSG FX series end milling cutters has been done.According to the test result,the cutter life and the best cutting condition of carbide end milling cuttes were discussed.
用OSG的FX系列立铣刀进行切削对比试验,根据试验结果,讨论硬质合金立铣刀的使用寿命及最佳切削条件。收藏指正
8.Various tests of simple geometry have been developed to calculate interface toughness, such as DCB (Double Cantilever Beam) test for mode I and ELS (End Load Split) test for mode II.
了计算界面韧度,发展出了各种几何形状简单的测试方法,例如有了测定Ⅰ型断裂阻抗的双悬臂试验和了测试Ⅱ型断裂阻抗的端部加载劈裂试验。收藏指正
9.The double contilever beam (DCB) test,the end notched flexure (ENF) test and the mixed mode bending (MMB) test were conducted to determine the interlaminar fracture toughness and the failure locus in mixed mode for the two composites.
在研究中进行了双悬臂梁(DCB)试验、端边切口(ENF)试验和混合模式弯曲(MMB)试验,以确定此两种复合材料的层间断裂韧性和混合模式断裂曲线。收藏指正
10.Based on the geologic characeristic of the test field, simulation model was established for gas injection displacement. After matching CO_2 injection dynamic performance by using GEM component simulator, development progrom such as water flooding, gas injection and WAG were designed and predicted. At the end, the optima program fit to this test aera was selected.
以芳48断块扶余油层试验区的地质特征基础建立了注气驱的数值模拟模型,利用GEM组份模拟器,在拟合注CO_2气驱动态基础上,设计了注水、注气和水气交替注入开发方案,优选了注气调整方案。收藏指正
尝试查询