爱词霸英语   汉语   手机版   软件版下载 | English
每日一句:正在加载...
2.The Production Test and Study On Medium—Manganese Cast Iron Ingot Mould
中锰铸铁钢锭模生产试验与研究收藏指正
3.IMPROVEMENT IN DESIGN OF 9-INCH DUAL PURPOSE INGOT MOULD AND PRACTICE
9?剂接酶侄?５纳杓聘慕?胧导收藏指正
4.THERMAL STUDY ON THE STEEL SOLIDIFICATION PROCESS IN THE HOT-TOP OF 610 TYPE INGOT MOULD
610型镇静钢锭帽口凝固过程的热工研究收藏指正
5.B114 INGOT MOULD AND GAUNTRY CRANE DEVELOPED BY BAOTOU IRON AND STEEL CO. APPRAISED BY MMI.
包钢B114钢锭模和门式挂板车通过冶金部技术鉴定收藏指正
6.CO2 has been used in steelmaking and teeming instead of argon for more than ten years. It is used for BOF bottom strring, ladle stirring, AOD treatment, continuous caster shrouding, stream shrouding and ingot mould puring and as ladle, tundish and ladle furnace inert gas.
以CO_2代替Ar在炼钢、浇注方面应用已十多年了,主要用于BOF炉底搅拌,盛钢桶钢液搅拌,AOD炉精炼,盛钢桶、中间罐、LF钢液保护,连铸、模铸注流保护以及锭模充气保护等。收藏指正
7.This paper stated high ternperature thermal stress measuring technique,method and results analysisunder casting site for large flat ingot steel mould of rare-earth nodular cast iron.
介绍了稀土球铁大型扁形钢锭模在浇铸工况下高温热应力的测试技术、方法和结果分析。收藏指正
8.Metallgie?erei Ralf Mewes GmbH - our products and services are covered into the following ranges: Metal castings, Metal goods and Light metal cast as well as Ingot pouring and/or Light metal permanent mould casting.
是一家令客户满意的生产商和服务商，该公司提供新型的、专门的产品，例如轻金属铸件。收藏指正
9.Temperature field of hollow ingot solidification is simulated by FEM.To different mould,effect of heat transfer coefficient between inner sleeve and cooling medium and thickness of core refractory on final position of solidification,the highest temperature of inner sleeve against cooling medium,and shrinkage cavity and porosity are compared.In addition,change of temperature in typical position of core refractory is also compared.
对空心钢锭凝固过程的温度场进行了有限元分析，对不同锭型结构的芯部换热系数、耐火材料厚度对最终凝固位置、内筒壁最高温度及缩孔疏松的影响进行了对比，并讨论了耐火材料典型部位的温度随凝固时间的变化。收藏指正
10.Abstract: Temperature field of hollow ingot solidification is simulated by FEM.To different mould,effect of heat transfer coefficient between inner sleeve and cooling medium and thickness of core refractory on final position of solidification,the highest temperature of inner sleeve against cooling medium,and shrinkage cavity and porosity are compared.In addition,change of temperature in typical position of core refractory is also compared.
文摘:对空心钢锭凝固过程的温度场进行了有限元分析，对不同锭型结构的芯部换热系数、耐火材料厚度对最终凝固位置、内筒壁最高温度及缩孔疏松的影响进行了对比，并讨论了耐火材料典型部位的温度随凝固时间的变化。收藏指正
尝试查询
汉英释义