爱词霸英语   汉语   手机版   软件版下载 | English
每日一句:正在加载...
1.Factory-painted ABS injection-molded hull has a professional, high-quality finish.
船身采用“ABS”塑料一次注塑完成，并经由专业技师组装完成。收藏指正
2.Application of Control Chart in Wall Thickness Control of Injection Molded Caps
两极控制图在注塑瓶盖壁厚控制中的应用收藏指正
3.CAD/CAE/CAM for Plastics Injection Molding (Ⅳ)The Calculation of Residual Stress and Analysisof Bending in injection Molded Parts
塑料注塑的CAD／CAE／CAM（Ⅳ）注塑件残余应力计算及弯曲变形分析收藏指正
4.Hsing, Yu-His(2003). “Shrinkage of Injection Molded Plastic Optical Pick-up Lens.”, Department of Aeronautics and Astronautics, National Cheng Kung University.
刑玉玺(2003)“射出成型之塑胶光学读取透镜收缩”，国立成功大学航空太空工程研究所硕士论文。收藏指正
5.The microstructures of some injection-molded crystalline plastics such as POM,PP, PE and PBT were investigated. It could be considered as a skin-core structure with inhomogeneity and anisotropism, the skin layer was highly oriented, whereas the core was composed of larger spherulites.
介绍了聚甲醛（POM）、聚丙烯（PP）、聚乙烯（PE）、聚对苯二甲酸丁二醇酯（PBT）等几种常用结晶性塑料在注射成型条件下的微观结构，它可以描述为表—芯结构，其特点是：非均质和各向异性；收藏指正
6.An inductor whose case has been formed via a molding process,Common molding processes in clu-de injection and transfer molding,Molded inductors typically have well defined body dimensi-ons which consist of smooth surfaces and sharper coners as compared to othercase types such as epoxy coated and shrink wrap coatings(Also see Inductor.
外壳以铸型掉程所成形之电感，通常铸型制程包括射出及转移铸型两种，与其他型式之电感如环氧权脂包覆的电感及伸缩套管之电感比较起来，铸型电感常有很明确的尺寸，平滑的表面及尖锐的边角。收藏指正
7.To prove the feasibility and practicability of the rotating injection molding method, experimental study was carried out with three processing parameters, i.e., rotating injection pressure, rotating injection capacity and rotating injection temperature. Three typical rubber products, including IIR sealing bush, tyre bladder and fluorine rubber liner bushing for stator within the propeller pump used in the oil-field were molded by injection.
为了证明旋转注射成型方法的可行性和实用性,从注射成型的三大要素:旋转注射压力,旋转注射能力以及旋转注射温度结合三种典型的橡胶制品:IIR密封套,轮胎胶囊和氟橡胶油田螺旋泵定子衬套进行了实验研究。收藏指正
8.COMBUSTION SYNTHESIS WITH SYNCHRONOUS DENSIFICATION BY HIP OF AIN-TiB_2 CERAMIC SLENDER TUBE MOLDED BY LOW-PRESSURE INJECTION
低压注射成型AlN-TiB_2陶瓷细长管燃烧合成气相热等静压研究收藏指正
9.Ethylene/octene copolymer sythesized by metallocene catalyst was a new kind of thermoplastic elastomer, which was molded as elastomer material by plastic common molding process such as injection, extrusion and blowing and also by rubber process such as chemical crosslinking by peroxide.
采用茂金属催化剂合成的乙烯－辛烯共聚物是一种新型热塑性弹性体，可用注射、挤出、吹塑等常用加工方法成型，又可用过氧化物进行化学交联，用橡胶加工方法制成弹性体材料。收藏指正
尝试查询