inspection glass
1.The function of automatic tracking the cutting point: if you need you can install inspection equipment of the glass edge, so that it can automatic track the cutting point if the glass wander.
2.Fuyao has two state-of-the-art PPG technology float glass lines, The float glass goes through a rigid inspection by on-line Lasor system, eliminating any flawed glass.
3.EXTENTION: THIS CRITERION SPECIFYS THE INSULATING GLASS SPECIFICATION, TECHNIQUE REQUIR, TEST METHOD, INSPECTION RULE, PACKAGE, MARK, TRANSPORTATION, AND STOCKPILE.
4.Closer inspection revealed a chink of sky - light window among the thistles, and when amazed investigators moved down the side of the hill they came across a pine door complete with leaded diamond glass and building.
5.This paper presents the designing of a high accuracy linear scannerused in laser beam scanning systems for automatic inspection of object size by means of a rectangular prism and correct selection of the rotation centre. The trasmitted laser beam scans in the direction precisely paralleled to outlet direction. For the prismatic glass with refraction index of about 1.9 and the measurement region up to 43.74mm, the maximum linear error is less than±20nm.
6.The hardness tester is applicable to measure micro hardness of micro &thin specimen, etc., and determine micro hardness of fraglie materials, such as glass, ceramic, agate, etc., being the ideal hardness testing instrument for scientific research institution, enterprise and quality inspection department to perform research and detection.
