爱词霸英语   汉语   手机版   软件版下载 | English
每日一句:正在加载...
2.EFFECT OF ALLOYING ELEMENTS ON CREEP RUPTURE STRENGTH OF 10% Cr FERRITIC HEAT RESISTANT STEEL
合金元素对10％Cr铁素体耐热钢持久强度的影响收藏指正
3.EFFECT OF CYCLIC STRESS ON CREEP RUPTURE STRENGTH OF A CAST SUPERALLOY WITH HIGH Al AND Ti CONTENTS
循环应力对一种高铝钛铸造镍基合金持久强度的影响收藏指正
4.The combination rate approached the optimum of 56% and the rupture strength was 45MPa as glutaraldehyde mass concentration was 5g/L.
当戊二醛的质量浓度为5g/L时,肝素的结合率为56%。 共混膜的断裂强度为45MPa.收藏指正
5.The best components A_2B_3C_1 of TiC-based cermets (TiC-WC-Cr_3C_2-Co-Ni-Mo) were obtained through orthogonal experiments which were taken the transverse rupture strength (TRS) as reference index.
通过正交试验法对TiC基金属陶瓷进行成分研究,选取抗弯强度为试验指标,进行极差分析,获得了最佳的TiC-WC-Cr3C2-Co-Ni-Mo金属陶瓷试验配方A2B3C1组合。收藏指正
6.With good transversal rupture strength and wear resistance, it is suitable for low-speed rough turning and milling of heat resistanct alloys, titanium alloys and of plastics glass well.
具有很高的抗弯强度和良好的耐磨性能，适用与低速粗车和铣削耐热合金、钛合金，也可加工玻璃钢。收藏指正
7.When the Nb con- tent exceeds 1.5 wt%,the eutectic NbC carbides on grain boundaries become lamellar and the amount of M_(23)C_6 carbides within grains decrease significan- tly,and therefore the creep rupture strength of the alloy decreases.
当 Nb 量进一步提高时,由于共晶 NbC 形成了片层状共晶团以及晶内 M_(23)C_6大量减少使蠕变断裂强度下降。收藏指正
8.Top notch
大腕收藏指正
9.Notch Strength and Notch Sensitivity of Materi- als
材料的切口强度与切口敏感性收藏指正
10.notch a run
得一分收藏指正
尝试查询