pilot production
2.PILOT PRODUCTION OF ADDITIVE "LAN-115B", AN OVER-BASED SULFURIZED CALCIUM ALKYL PHENOLATE
3.A GENERAL OF PILOT PRODUCTION OF CONTINUOUS CAST BILLET FOR PIPES BY VOLGA STEEL TUBE WORKS
5.A rapid, effective and simple strategy for pilot production of DGR wasestablished using selected strain with high expression level.
6.The pilot production of steel castings by using the water-soluble core proves that the mixture is suitable for making those cores of complicated shapes which are strongly heated by liquid steel during pouring.
7.Crossplot Φ CNL ρ b and R LLd R LLd ·R LLs -1 ·Δt were created according to data of oil well test and pilot production,the dividing standard of reservoir (oil bearing reservoir above oil water contact)and nonreservoir(dry sand) was determined.
8.s:Discussion of treatment of acid seawater after desulfuration. By industrialized pilot production in which white mnd is added, desulfuration rate can be increased by 15%～30%, thus gas/liquid ratio in absorption tower is raised twice over, resulting in reduction of energy consumption for water hoisting.
9.Using 0.02% of Tea ployphenols (both oil soluble reagent and water soluble reagent) and TBHQ treatments as the control, it is found out that the AOB antioxidation effect of 0.02% dosage slightly surpass that of the same amount of TBHQ dosage, but enormously stronger than that of tea ployphenols. A pilot production was done in ZheJiang Xiaowanfzi Food CO.
10.This paper reviews the development of the technology of metal-backed moulding from scientific research stage into pilot production stage since1976. It describes the four processes named metal-backed moulding, pneumaticdesulfurizing, spheroidizing in mould and cast waste heat normalizing, and the2t coreless industrial frequency induction furnace with pneumatic pouring deviceand nondestructive testing equipment.
