point to point connection
1.The Bluetooth master device was composed of a PC and a Bluetooth communication unit. The slave one was based on microcontroller STC89C51. The hardware platform of system was built based on the Bluetooth devices to realize the point-to-point connection.
2.TCP is a reliable point-to-point connection-oriented protocol, but the features of satellite network such as long delay, high bit error, and asymmetric bandwidth can result in very low channel utilization when TCP works over broadband satellite networks.
3.Theirfore, authentication by way of IEEE 802.1x became a hotspot for its simple, effective Port based network access control makes use of the physical access characteristics of IEEE802.1x LAN infrastructures in order to provide a means of authenticating and authorizing devices attached to a LAN port that has point-to-point connection characteristics, and of preventing access to that port in cases where the authentication and authorization process fails!
4.Document conferencing between two parties is quite simple: a point-to-point network connection links the two sites and the conference gets under way.
5.The Point-to-Point Protocol is designed for estabishing a connection so as to transport multi-protocol datagrams between two peers.
6.Traditional electric systems mostly introduced point-to-point communication mode, little affiliation with them. That made the connection system complex.
7.In GPRS network,the physical layer applies GPRS protocol,the link layer adopts point-to-point protocol,the application layer uses Socket function call of TCP / UDP to realize UDP data message or TCP connection between client and server. The software flowchart is offered,which shows the embedded communication system is an important means for communication between remote control and embedding system.
8.Finally, by making use of programming in the VC++ 6.0 and making connection between two PCs by the Ericsson Bluetooth module ROK101 008, we exploit the Bluetooth point to point wireless communication system, giving the detailed methods about the design of the hardware and sofeware experimental system.
9.By preconditioning an image from a serial of images and based on the traditional differences of images, the authors put forward the connection and filling of moving objects by using math morphologic dilation and erosion arithmetic, and then remove unnecessary point to get moving target.
