爱词霸英语   汉语   手机版   软件版下载 | English
每日一句:正在加载...
1.This model map the network communication on the Internet to a weighted and oriented graph, called as network-link graph . Computers on the network are mapped to nodes in the graph, and network-links arc mapped to oriented edges in the graph, different kinds of attributes of one network-link are mapped to weight on the oriented edge, such as source/destination nodc> source/destination port, protocol type and so on .
本文提出的网络通信模型将Internet上的网络通信映射为网络连接拓扑图，它是一个赋权有向图，网络上的通信主机映射为图中的结点，主机之间的通信活动映射为图中结点之间的有向边，通信过程中的各种属性，如源／目的结点、源／目的端口、协议类型等映射为图中边上的权值。收藏指正
2.Creating Port Daemon to Support IPv4and IPv6 Protocol Stacks Simultaneously
端口守护进程的研究与实现:同时支持IPv4与IPv6协议栈收藏指正
3.This paper explains two ways? printer redirection and parallel port redirection? to implement local printing on WBT base on Linux? using device-redirection feature of RDP 5.x protocol.
本文利用RDP5.x协议对设备重定向的支持,使用打印机重定向和并口重定向两种方式,在基于Linux的Windows终端上实现了本地打印功能。收藏指正
4.⑤ Analyze the resource of DSP, utilizing its Multichannel Buffered Serial Ports (McBSP) which simulates SPI protocol to interface with ECG collecting module and utilizing its Host-Port interface (HPI) to interface with network module.
⑤ 分析DSP的资源，利用其多通道缓冲串口（McBSP）模拟SPI协议和心电采集模块接口，利用主机接口（HPI）和网络模块接口。收藏指正
5.The chip is compatible to world-wide standards of NTSC/ PAL / PAL/M. And the I~2C protocol port has been used to write the inner ports.
该芯片兼容NTSC/PAL/PALM三大制式,并采用I2C协议标准接口进行模式的配置。收藏指正
6.How to control Modem by TAPI and how to realize asynchronous input and output of by Win32 communication API are introduced. And the protocol of series port communication is founded to realize file transmission.
介绍了如何通过Microsoft的电话应用编程接口(TAPI)控制Modem和通过Win32通信API函数实现串口的异步I/O,建立了串口通信的相应协议,以实现文件传输。收藏指正
7.According to the criterion of NMEA-0183 protocol,we transmitted data to a computer by serial port with a GPS receiving apparatus,analysed and processed these data.
根据NMEA-0183协议的标准规范,用GPS接收机将接收到的信息通过串口传送到PC机,并对接收到的数据进行分析处理。收藏指正
8.Second ,we developed an applied receive system based on a kind of GPS OEM, so it can receive the satellitic signal of GPS and communicate with computer via serial port, and wrote the receive programme according to the protocol of the output information.
其次，把某一款C／A码GPS接收OEM板进行了硬件扩展，使它成为一个能够完成GPS卫星信号接收以及与计算机通过串口进行通信的实用接收系统。 根据输出信息协议编写了接收程序。收藏指正
9.This paper aims at CCM2 protocol of Koyo PLC to develop the relevant OPC-Server by using program technology of serial port,VC6.0 platform and WinTECH Software,which realizes the effective access of the PLC.
针对光洋PLC的CCM2协议,通过串口编程技术,并采用VC6.0和WinTECH开发包开发了相应的OPC-Server,实现了设备的有效接入。收藏指正
10.It elaborates the design of hardware interface between wireless Transceiver Module and MCU, compiles the protocol of point to multi-point wireless communication, and designs the system software of point to multi-point wireless communication. Initially discuss the realization principle and the Simulating road map at host computer port.
论述了单片机与无线收发模块的硬件接口设计,点对多点无线通信协议的编写,点对多点无线通信系统的软件设计,并对该系统的实现原理和主机端模拟行车路径进行初步论述。收藏指正
尝试查询