爱词霸英语   汉语   手机版   软件版下载 | English
每日一句:正在加载...
1.EFFECT OF COMPOSITION, STEP SINTERING AND POST ANNEALING ON THE HIGH-Tc SUPERCONDUCTIVITY OF Bi-Sr-Ca-Cu OXIDE
组份,阶梯烧结和后退火对Bi-Sr-Ca-Cu氧化物高Tc超导性的影响收藏指正
2.The Bi-Sr-Ca-Cu-O Superconducors with the Tc-110K have been prepared by the step sintering, post annealing and furnace cooling.
用阶梯烧结,后退火和随炉慢冷制备出了 Tc～110KBi—Sr—Ca—Cu—O 超导体。收藏指正
3.Be means of the step sitering at 865-880℃ and following post annealing, the low-Tc phase can be m-inimized and the high-Tc phase can be increased.
在865—880℃之间阶梯烧结后接着退火处理,可使低 Tc 相减少,高Tc 相增加。收藏指正
4.Influences of Tl2O partial pressure and thallination temperature on the component phases and properties of Tl2Ba2CaCu2O8 HTS thin films were studied in the second step of ex situ post annealing treatments.
铊化后处理过程中，研究了Tl2O分压和铊化温度对Tl2Ba2CaCu2O8高温超导薄膜相组成及其性能的影响。收藏指正
5.The influence of heat?treatment on microstructure and mechanical properties at room temperature of Ti_6.5Al_2.5Sn_4Zr_0.7Mo_1Nb_0.2Si (BT18y) alloy were investigated. By means of TEM and X-ray techniques, the microstructure of the post annealing alloy was studied.
在实验室条件下，研究了Ti?6．5Al?2．5Sn?4Zr?0．7Mo?1Nb?0．2Si合金的热处理、常温机械性能和显微组织。收藏指正
6.The effect of the structure of matrix resins, processing method, pre-treatment of carbon black, post-treatment (annealing) of composites on conductive properties of LDPE/EPM/carbon black was investigated.
研究了基体树脂的结构、工艺方法、炭黑的预处理、复合材料的后处理 (退火 )等对LDPE/EPM/炭黑导电复合材料导电性能的影响。收藏指正
7.When irradiation response and dose are linear, total dose radiation and post-irradiation annealing at room temperature are determined for one random by choosing absorbed dose rate, and total dose effect at other absorbed dose rate can be predicted by using linear system theory.
研究结果表明，辐射响应与吸收剂量成线性关系时，在实验室选用任一特定剂量率进行总剂量辐射和辐照后室温退火，可以通过线性响应理论模拟其它剂量率辐射下的总剂量效应。收藏指正
尝试查询
汉英释义