爱词霸英语   汉语   手机版   软件版下载 | English
每日一句:正在加载...
1.The specified technique parameters are as follows: hot press parameters of MEA: hot press operation parameters should be controlled within the range of 135℃ ~150℃ for hot press temperature, t1=3Os t2=90s for hot press time, 4MPa~6MPa for hot press pressure.
具体工艺参数如下:MEA成型的主要工艺参数:热压温度为135℃～150℃,热压时间为t_1=30s、t_2=90s,热压压力为4MPa～6MPa;收藏指正
2.When thickness is 16 mm,the proper hot-press temperature was 190 and hot-press time was 25 smm~(-1) the products would be satisfied.
本次实验中板材厚度为16mm时,热压温度190℃,热压时间25s. mm-1是比较合适的。收藏指正
3.Effect of Press Temperature on Equal Channel Angular Pressing (ECAP) to Cu-based Shape Memory Alloy
挤压温度对Cu基形状记忆合金等通道转角挤压过程的影响收藏指正
4.The experiment results show that the most appropriate technical conditions were as follows: hot press temperature-160℃, hot press time-30sec/mm, resin content for straw-6%, density-no less than 0.85g/cm3, mat moisture content-10% and RRB-no more than 30%.
生产草木复合板的较优工艺是热压温度160℃，热压时间30sec／mm，稻草施胶量6％、木纤维施胶量11％，密度不小于0.85g／cm~3，配比不超过30％。收藏指正
5.Through orthogonal test and odd factor test, the catalytic techniques of raethanol synthesis from straw syngas were experimented, received preference technological parameters-space velocity 8000 L kgcat-1h-1 press 5.0 MPa temperature 235C.
然后通过正交实验和单因素实验，对秸秆气催化合成燃料甲醇工艺进行实验研究，得出较合适的工艺参数为：质量空速8000 L·kgcat~(-1)·h~(-1)、压力5.0MPa、温度235℃。收藏指正
6.The technology of supercritical CO_2 extracting Rhodotorula glutinis pigments: extracting press 18-19Mpa, extracting temperature 44.5-45.0℃, flow rate of CO_2 4.8-10.5ml/min, extracting time 10min.
超临界CO_2萃取红酵母色素的工艺参数:萃取压力18-19Mpa,萃取温度44.5-45.0℃,CO_2流量4.8-10.5ml/min,萃取时间10min。收藏指正
7.EFC effectively resolved the entrance press of ball tube mill and temperature strong coupling of its export, This system can better control function of ball mill.
实践表明,该系统既简化了多变量控制系统的模糊控制规则,又有效地解决了磨煤机入口负压和出口温度强耦合的问题。收藏指正
8.The Temperature Controller of the Press Plungers for Glasswares
玻璃器皿压机冲头温度自动控制装置收藏指正
9.Application of PM Temperature Press Technology in Automotive Connecting Rod Manufacture
粉末冶金温压工艺在汽车连杆制备中的应用收藏指正
10.By using a six anvil press, the phase behaviors of beryl at high pressure and high temperature was investigated at pressure up to 5 GPa.
利用单元六面顶压机,在≤5GPa 范围内对绿柱石进行了实验研究。收藏指正
尝试查询
汉英释义