爱词霸英语   汉语   手机版   软件版下载 | English
每日一句:正在加载...
1.DIMENSIONLESS COEFFICIENT METHOD OF DESIGNING THE WELDING SECTION OF AXIAL PRESSURE COMPONENT WITH H SHAPE
焊接H形轴压构件截面设计的无量纲系数法收藏指正
2.In the optimal design of annular optimum chink of hydraulic pressure component, machining precision and moveable states of the component from objective reality must be taken as the base, and then chinky altitude, chinky length and oil viscosity are designed.
液压元件最佳环形缝隙的优化设计,应以实际机加工精度和元件运行状况为基础,综合设计缝隙的高度、缝隙的长度和油液的粘度等参数。收藏指正
3.In this paper,conventional testing instruments and calculating methods for the water vapor pressure component are analyzed and discussed. In addition,a more precise testing instrument and the corresponding calculating method,recommended by the Central Meteorological Bureau (CMB),are introduced. Last,the way to select a testing instrument or to design a self made one is given so that the instrument might be the fittest for the general or simulated atmosphere conditions when field determination is conducted in IC engine testing.
本文分析讨论了水蒸气分压力的常规测定仪表及压力值计算方法，介绍了中央气象局推荐的较精确的测定仪表及压力值计算法，提出了适用于内燃机试验现场通常条件和大气模拟条件下的测定仪表选取或自制仪表设计及压力值实用计算方法。收藏指正
4.The results of the Raman spectrum have been described for the diamond with a high component of boron, synthesized by the medium of FeNiCo and NiMnCo ally, respectively, and the carbon sources from the B 4C at a high temperature and high pressure(the component of the boron is more than 1 wt%)。
对B4C为碳源、分别以FeNiCo与NiMnCo合金为触媒,高温高压下合成出的高含硼金刚石(B含量大于1wt%),进行了拉曼谱测试。收藏指正
5.The constants of vdw EOS were evaluated from saturated vapor pressure of pure component by introduction of VIE criterion to EOS, and VLE of mixtres were predicted satisfactorily.
通过纯流体的VLE条件,用饱和蒸汽压数据得到vdW方程常数,较准确地预测了混合物的VLE。收藏指正
6.The catalyst was prepared with Cu,Fe,Mn,Mo as main active components and γ-Al_2O_3 as carrier,and used in the treatment of DSD wastewater under high temperature and pressure. The effects of active component proportion and calcining temperature on the activity and stability of the catalyst were studied.
以金属Cu,Fe,Mn,Mo为主要活性组分,以γ-A l2O3为载体制备催化剂,在高温高压下催化氧化处理DSD酸废水,探讨了活性组分配比、焙烧温度对催化剂催化活性与稳定性的影响。收藏指正
7.Influences of Tl2O partial pressure and thallination temperature on the component phases and properties of Tl2Ba2CaCu2O8 HTS thin films were studied in the second step of ex situ post annealing treatments.
铊化后处理过程中，研究了Tl2O分压和铊化温度对Tl2Ba2CaCu2O8高温超导薄膜相组成及其性能的影响。收藏指正
8.Based on the acoustic radiation mode analysis, the transfer matrix relating the pressure at every field point to normal component of surface velocity is formed.
摘要基于声辐射模态分析，建立了外部场压和结构表面振动速度之间关系的传递矩阵。收藏指正
9.The study shows that the longitudinal component of the pressure force is mainly balanced by the vertical eddy frictional term and the lateral component of the pressure force is mainly balanced by the Coriolis force.
研究表明：在磨刀门河口动力平衡中，纵向的主要平衡项为压力项和垂向涡动摩擦项，侧向的主要平衡项为侧向正压力项和科氏力项。收藏指正
10.Under temperature 25℃ and applied pressure of 1.0MPa, observed rejection of dye component reached 100%. After six-stage batch diafiltration operation, concentration of dye increased 2.6 times, and concentration of NaCl decreased from 0.214mol/L to 0.0025mol/L.
在温度25℃和压力1.0MPa下，膜对染料截留率达到100％，经过六次加水浓缩的间歇渗滤操作后，料液中NaCl浓度从0.214mol/L降到0.0025mol/L，料液被浓缩了2.6倍。收藏指正
尝试查询
汉英释义