procedure manual
1.Based on the MTM(Made to Measure) system, this paper studies the conversion technologies from 2D patterns to 3D garments, which can change the pattern-garment procedure from the traditional manual processing into automation form, and then realize the quick manufacturing of garments with small quantities but a lot of varieties.
3.Through a study of the welding of 6 mm thick TA2 plate,the authors probe into the technique of one-side welding and double-forming procedure of industrial pure titanium,in which argonaut welding is preceded by manual argon tungsten-arc welding,and together they work effectively in reducing the flaws in welding joint.
5.If the process controller was in automatic scroll mode at the time of the changeover to "manual", it is preferable to select the "RUN/STOP "functin in order to stop the time base and set the reference value, since in the event of an automatic restart it is easier to advance the program than reverse it if it has gone too far during the manual procedure.
6.The legal basis for concluding that the guideline, criterion, bulletin, provision in a manual, instruction, order, standard of general application, or other rule or procedure is a regulation as defined in Section 11342.600 of the Government Codeand that no express statutory exemption to the requirements of the APA is applicable.
