program comparison
1.In this paper,the basic principle of the Rosenblueth method is described,and the FORTRAN language is used to write the calculation program. A comparison among the Rosenblueth method,the Fosm method and the Monte Carlo method is made through a calculation example,which proves the advantage of the Rosenblueth method.
2.The thesis presents Exp-Golomb. CAVLC and CABAC in detail, and based on the newest program JM10.2, the comparison between CAVLC and CABAC for coding efficiency is also presented.
3.The fundamental principle of Rosenblueth method have been presented in detail. We use the FORTRAN language to write the calculator program and prove its advantage by comparison.
4.It analyzed the IGES composing of general CAD data format. The program realized the document reads. And it resolved the comparison between survey data and CAD designed model.
5.On the premise of satisfying all constraint conditions stipulated in the codes with the pipe thickness spacing, height and thickness of stiffener rings as variables and the total steel quantity per meter of pipe as objective function, the program is developed for structural stress computation and comparison of total steel quantity used so as to select the alternative with smallest total steel quantity per meter of pipe.
6.The Comparison between Linear and Nonlinear Edit System and Its Comprehensive Application in Television Teaching Program Making
7.Studies on Comparison of Models and Calculation Results in BPA and PSS/E and Data Interface Program Developing
8.Based on cir-cuit theory,this paper gives an analysis model of common mode noise in the input side of a forward converter,which is caused by ground current due to the periodic instantaneous change of the voltage across the parasitic capacitance between the drain of the MOSFET and the chassis ground. By means of simulation with PSPICE program,the paper also pre-sents the effect of soft switching on CMN in comparison with hard switching.
9.In this paper, Parlay CC API(Parlay Call Control Application Program Interface) and SIP(Session Initiation Protocol) logical components are first described and then with a comparison between their logical relations, a mapping relationship in method, response and address is given between SIP and Parlay CC API. Finally an application sequence diagram using Parlay CC API based on SIP is drawn, and some simulate experiments show that a majority of SIP-based Parlay CC API functions can be implemented.
10.In this paper the program based on trace line method is used for the wheel rail space dynamic contact geometry relationship, some analysis and comparison of geometrical contact states between the different wear type treads and rails interactions are given, considered of the lateral section curvature radius and equivalent taper, the abilities in contact stress, the critical speed in straight line, and curve negociation performance are discussed.
