爱词霸英语   汉语   手机版   软件版下载 | English
每日一句:正在加载...
1.On Improving Noise Reduction with Proper Design of Composite Material Structure
铺层设计对复合材料结构降噪特性的影响收藏指正
2.This paper designed ATB mixtures by the method recommended by Technical Specifications for Construction of Highway Asphalt Pavement, SUPERPAVE mixture design method, Bailey gradation design method, and mechanics mixture design method. Through analyses of volume and mechanics indexes and pavement performance of ATB mixtures under different design methods, the proper design method of ATB is proposed in this paper.
基于《公路沥青路面施工技术规范》推荐方法、SUPERPAVE设计方法、贝雷设计方法、力学设计方法设计沥青稳定碎石基层混合料，通过对比分析其物理、力学指标，提出了适合沥青稳定碎石基层混合料组成设计的方法，并对其路用性能进行了研究。收藏指正
3.For environmental concerns, a proper design of the brine outfall is essential to enable the end discharge mix rapidly with the ambient coastal waters.
出于环境保护考虑，保证海水淡化后产生的高盐度尾液能够迅速与受纳海水掺混的排放口设计显得尤为重要。收藏指正
4.? The results show that ?M 2 y? fluctuates with the active layer width ?W,? which is useful for the proper design of the active layer width.
结果表明平行于结平面方向上的光束质量因子随有源层宽度而波动 ,这一结果可作为有源层宽度合理设计的参考收藏指正
5.The matched filters are designed to operate with a 65.2MHz center frequency, 8.2Mbit/s cod rate (about 0.123/us tap spacing), 31.25us duration and the ratio of the main correlation peak to the largest sidelobe is of 20dB. Measurements indicate that the predicated performance is achievable by proper design procedures and fabrication techniques.
匹配滤波器的中心频率为65.2MHz,编码速率为8.2Mbit/s(抽头间隔约0.123/μs),持续时间为31.25/μs,自相关峰值与最大旁瓣比为20dB。 测试结果表明,采用适宜的设计方法和工艺技术可获得预期的性能。收藏指正
6.Therefore, proper program design of sequence and cycle control should notice as follows:make I/O point、coil of relay of auxiliary point and act principle and act condition of TIM definite;
因此 ,正确设计基本的时间顺序循环控制程序应注意I/O点、辅助点继电器线圈及TIM动作原理和动作条件 ;收藏指正
7.Abstract: A reasonable and proper selection of design standard and code isa basic presupposition of design work,as well as a basis for the nationalization of equipment and materials, optimization of process flow and reduction of engineering cost.
文摘:合理、适度地选择设计标准及设计参数是开展设计工作的基本前提，也是推行设备材料国产化、优化工艺流程和降低工程造价的基础。收藏指正
8.A reasonable and proper selection of design standard and code isa basic presupposition of design work,as well as a basis for the nationalization of equipment and materials, optimization of process flow and reduction of engineering cost.
合理、适度地选择设计标准及设计参数是开展设计工作的基本前提，也是推行设备材料国产化、优化工艺流程和降低工程造价的基础。收藏指正
9.By analyzing the performance of J2EE applications when the Web components visit EJB components and the client visits entity EJBs with and without using the design patterns, the paper concludes that the proper use of design patterns can improve both the architecture of J2EE applications and their performance.
本文分析了在Web组件与EJB组件交互时、客户端访问实体EJB时,设计模式对J2EE应用程序性能的影响,得出的结论是:合理使用设计模式,不仅可以改善J2EE应用程序的架构,而且可以显著提高其性能。收藏指正
10.This article analyzes tte structure of Ire inlet,shell,cone,disclqarge pipe and dust outletthrough which fi e result includes Ir e relationship betweenthe parameter of structures and the performance cf cyclone dust collector,and the proper data in structural design
对旋风除尘器的进气口、圆筒体、圆锥体、排气管、排尘口的结构设计进行了分析。 通过分析，得出了旋风除尘器的各结构参数与性能的关系及在设计中结构参数的合理取值范围。收藏指正
尝试查询