1.A single pass glassy layer on the surface of Fe 40 Ni 36 Si 8 B 14 V 2 alloy can be achieved using a power density of 2.7×10 5W·cm 2 and a range of scanning speeds form 1.0 m·s 1 to 2.0 m·s 1 .
2.③In a certain range, while keeping constant scanning speed, the density and abrasive resistance of sintered samples are raised with the increase of laser power.
3.Photogrammetry, Laser Scanner, 3d Scanner, Aerial, Close Range and Satellite Cartography Systems. 3D Reconstruction from images and/or laser scanning data. Customized hardware and software data acquisition.
6.The low temperature thermodynamic behaviour of the water-lysozyme system was investigated in the water content range of 0.03 to 2.70 g (water)/g (Protein) before and after denaturation using differential scanning calorimery (DSC) and a difference DSC method.
7.This article discusses a scan controlling technique of Infrared detector based on the designed scanning mode for increasing range of IFOV dynamically.
8.According to this model, the results of analysis proved that there is an optimization in the selection of scanningrange, in order to achieve a shortest acquisition time.
9.Host-based scanning tools are run on each host to scan for a wide range of system problems including:unauthorized software, unauthorized weak passwords, dormant viruses, and inappropriate access permissions.
10.The trouble of the pen vibration when scanning in the range of 25 to 50 μm is completely eliminated and the imported Nernst lamp can be replaced with domestic HG_1 light source.
