removal efficiency
4.The results showed that the removal efficiency of chemical oxygen demand (COD) and decoloration efficiency were above 95%.
5.The removal efficiency would be reduced if the concentration of the NOX increased, the energy efficiency enhanced on the other hand.
6.With the increasing of the bed height, NH3-N removal efficiency also raised slightly. When the bed height was more than 80cm, NH3-N removal efficiency almost unchanged.
7.While S2 only bore the maximum inlet toluene concentration(5.72 mg/L) with 65.65% removal efficiency.
9.Affecting Study of the Aerobic Nitrifying Ability to the Denitrifying Phosphorus Removal Efficiency in the DNP-MSBR Process
10.FBR has high removal efficiency for SS and turbidity, the residual turbidity is lower than 1 NTU.

