爱词霸英语   汉语   手机版   软件版下载 | English
每日一句:正在加载...
2.EFFECT OF ALLOYING ELEMENTS ON CREEP RUPTURE STRENGTH OF 10% Cr FERRITIC HEAT RESISTANT STEEL
合金元素对10％Cr铁素体耐热钢持久强度的影响收藏指正
3.EFFECT OF CYCLIC STRESS ON CREEP RUPTURE STRENGTH OF A CAST SUPERALLOY WITH HIGH Al AND Ti CONTENTS
循环应力对一种高铝钛铸造镍基合金持久强度的影响收藏指正
4.The combination rate approached the optimum of 56% and the rupture strength was 45MPa as glutaraldehyde mass concentration was 5g/L.
当戊二醛的质量浓度为5g/L时,肝素的结合率为56%。 共混膜的断裂强度为45MPa.收藏指正
5.The best components A_2B_3C_1 of TiC-based cermets (TiC-WC-Cr_3C_2-Co-Ni-Mo) were obtained through orthogonal experiments which were taken the transverse rupture strength (TRS) as reference index.
通过正交试验法对TiC基金属陶瓷进行成分研究,选取抗弯强度为试验指标,进行极差分析,获得了最佳的TiC-WC-Cr3C2-Co-Ni-Mo金属陶瓷试验配方A2B3C1组合。收藏指正
6.With good transversal rupture strength and wear resistance, it is suitable for low-speed rough turning and milling of heat resistanct alloys, titanium alloys and of plastics glass well.
具有很高的抗弯强度和良好的耐磨性能，适用与低速粗车和铣削耐热合金、钛合金，也可加工玻璃钢。收藏指正
7.When the Nb con- tent exceeds 1.5 wt%,the eutectic NbC carbides on grain boundaries become lamellar and the amount of M_(23)C_6 carbides within grains decrease significan- tly,and therefore the creep rupture strength of the alloy decreases.
当 Nb 量进一步提高时,由于共晶 NbC 形成了片层状共晶团以及晶内 M_(23)C_6大量减少使蠕变断裂强度下降。收藏指正
8.This kind of steel is a casting material of P91, with the better performances of high temperature anti-oxidation ,high-temperature creep rupture strength, t hermal conductivity and the lower performances of t hermal expansion .There is no casting in Chinese.
该钢种为P91对应的铸材牌号，材料具有良好的高温抗氧化性能，较高的高温蠕变强度、持久强度和韧性，低的热膨胀性，良好的导热性、加工性等特点。收藏指正
9.And this epoxy asphalt binder has an average rupture elongation of 281.9%, average tensile strength of 2.63 Mpa, Marshall stability of its cured epoxy asphalt concrete of 37.0 kN, uncured epoxy asphalt concrete of 10.2 kN and the combined beam of fatigue test still well after 12,000,000 cycles load (5kN, 10Hz, sinusoidal waves).
由于最终形成了不熔不溶的热固性材料,从而该环氧沥青结合料的平均断裂延伸率达281.9%、平均拉伸强度2.63MPa、相应的未固化马歇尔试件平均强度为10.2kN、固化后试件平均强度37.0kN的优良性能。 复合梁在6kN,10Hz加载下进行疲劳试验,扰动1200万次后复合梁挠度差基本没有变化,复合梁基本没有损伤。收藏指正
10.Test items include compression strength, split strength, anti-breaking strength, and modulus of compression, modulus of rupture, temperature shrinkage coefficient, humidity shrinkage coefficient and anti-erosion performance.
试验内容包括：抗压强度、劈裂强度、抗折强度、抗压回弹模量、抗折回弹模量、温缩系数测定、干缩系数测定以及抗冲刷性能。收藏指正
尝试查询
汉英释义