sintering range
3.The studies indicate that different content of pyrophyllite and dolomite can cause the following three cases: (1) making the refractory point decrease linearly and, to some extent, influencing the microstructure and properties of sintered body; (2) acceleratingmullite formation during sintering, reducing thermal expansion coefficient of bond, reinforcing the matching nature and improving the flexural strength and shock strength; (3) preventing SiC grinding tool from generating black core, expanding suitable sintering temperature range of SiC grinding tool.
5.The influence of burning system on the properties and structure of the ceramic capacitors has been studied Under the certain temperature system, the optimum sintering temperature of the ceramics was primarily decided by the content of Bi2O3·3TiO2. The sintering temperature dropped with the adding of Bi2O3·3TiO2. At the range of suitable sintering temperature, slow heating and low temperature sintering can obtain fine grain and dense structure .
8.Many studies indicted that the body could achieved broad range of sintering temperature when the proportion of talum (3MgO ·4SiO_2) and kaolinite (Al_2O_3·2SiO_2) was greater than four , so it could be determined that the percentage of clay was approximately 15 percent . Further studied on the system phase of Na_2O ?
