爱词霸英语   汉语   手机版   软件版下载 | English
每日一句:正在加载...
1.Study on Microstructure, Properties of Spark Plasma Sintered AIN/BN Composites and Its Modification
AIN/BN复相陶瓷的SPS制备、显微结构与性能调整收藏指正
2.Ti3AlC2/TiB2 composites were prepared by the spark plasma sintering(SPS)process with different volume fractions of TiB2,and the properties of Ti3AlC2/TiB2 composites were investigated.
采用放电等离子烧结(spark plasma sintering,SPS)工艺制备了Ti3AlC2/TiB2复合材料,并研究了复合材料的性能。收藏指正
3.OM, SEM, EDX and other techniques were used to analyze the porosity, microstructure and of nano-composite Ti(C,N)-based cermets produced by Spark Plasma Sintering(SPS).
采用放电等离子技术(SPS)烧结制备出纳米复合Ti(C,N)基金属陶瓷材料。收藏指正
4.High purity Ti3SiC2 ceramics were prepared by the mechanical alloying(MA)and spark plasma sintering(SPS)methods,and the effect of trace amounts of Al on these processes was investigated.
采用机械合金化和放电等离子烧结技术制备了纯度较高的Ti3SiC2陶瓷,研究了微量Al对Ti3SiC2的机械合金化和放电等离子烧结过程的影响。收藏指正
5.TiC/ Ti3SiC2 composite with relative denseness of 99.1% can be fabricated by spark plasma sintering under mechanical alloying 1 h at 1 200℃for 5 min and the pressure of 30 MPa.
在1200℃下,保温5min,加压30MPa,对机械合金化1h时的粉体进行放电等离子烧结可制备相对密度高达99.1%的TiC/Ti3SiC2复合陶瓷。收藏指正
6.A functionally graded material(FGM) was also produced by spark plasma sintering technology(SPS), and sintering powders of nano WC/10%Co, nano WC/12%Co, micro WC/15%Co and disk of stainless steel.
然后采用火花等离子烧结技术制备了硬质合金功能梯度材料,该材料由纳米WC/10%Co、纳米WC/12%Co、微米WC/15%Co混合粉以及不锈钢圆片烧结而成。收藏指正
7.The La_(0.67)Sr_(0.33)MnO_3 powder synthesized by SHS method was sintered by three different sintering method respectively, that is conventional solid state sintering (CSS), high pressure sintering (HP) and spark plasma sintering (SPS).
SPS和常压烧结的样品相比：SPS烧结样品的金属—绝缘相转变温度T_p比常压烧结的样品高，而SPS烧结La_(0.67)Sr_(0.33)MnO_(3-δ)样品的平均粒径比常压烧结的要低。 这可能是来源于晶界对双交换作用的另一个影响。收藏指正
8.The synthesis of Ti_3AlC_2/TiB_2 composites was studied by spark plasma sintering with different volume content of TiB2.Results indicated the bulk Ti_3AlC_2/TiB_2 was fabricated by SPS,which soaked for 8 min under a pressure of 30 MPa at 1 250 ℃.
采用放电等离子烧结方法研究了Ti3AlC2/TiB2复合材料的制备和不同TiB2含量(体积百分数)对Ti3AlC2/TiB2性能的影响。 研究表明,在1250℃,30MPa压力和保温8min条件下烧结,可以得到相对密度达98%以上的致密Ti3AlC2/TiB2块体材料;收藏指正
9.Ti_3AlC_2/TiB_2 composite has been sintered by Spark Plasma Sintering(SPS). Its properties including indensity,hardness,phase content,fracture toughness,flexural strength and microstructure has also been tested. The effect of TiB_2 on the properties and microstructure of Ti_3AlC_2/TiB_2 composite was studied systematically.
放电等离子烧结合成了Ti_3AlC_2/TiB_2复合材料,对其进行了密度、硬度、相含量、断裂韧性和弯曲强度以及微观结构的测试,比较系统地研究了TiB_2对Ti_3AlC_2/TiB_2复合材料性能和结构的影响。收藏指正
10.By means of resistance and capacitance coupled negative feedback method to control the plasma discharge development process and prevent the transition from glow discharge to spark discharge in a pin-to-plate static air plasma generator, a stable alternative current atmospheric glow discharge is produced successfully.
在静态大气压空气针－板等离子体发生器中，采用阻容耦合负反馈方法控制等离子体放电发展过程，成功地抑制了辉光放电向火花放电的过渡，产生了稳定的交流辉光放电。收藏指正
尝试查询