爱词霸英语   汉语   手机版   软件版下载 | English
每日一句:正在加载...
1.When the pressure in the tank is balanced with the atmospheric pressure, the exhalation valve flap of the respiration valve is closely cooperate with the exhalation outlet valve seat, the inhalation valve flap is closely cooperate with the inhalation outlet valve seat.
当储罐内压力与大气压力平衡时，呼吸阀呼出阀瓣与呼出口阀座严密配合，吸入阀瓣与吸入口阀座严密配合。收藏指正
2.Leave the drain valve of the holding tank opened.
让贮槽的排水阀打开。收藏指正
3.The equipment includs: 1) Atmosphere condenser (optional item), 2) Cascade tank body(observation tank,filter tank, receiver), 3) Level gauge, 4) Level controller, 5)Ball float water inlet valve, 6) Salinometer, 7) Inlet/outlet valve, etc.
设备模块主要包括：1、大气冷凝器（可选）；2、热井本体（观察柜、过滤柜、贮存柜）；3、液位计；4、液位控制器；5、浮球式补水阀；6、盐度计；7、进出口阀等等组成。收藏指正
4.The equipment includes:1、Atomsphere condenser(optional item), 2、Hot well body(observation tank,filter tank,receiver),3、Level gauge, 4、Level controller 5、Ball float water inlet valve 6、Inlet/outlet valve,etc.
设备模块主要包括：1、大气冷凝器(可选)；2、热井本体(观察柜、过滤柜、贮存柜)；3、液位计；4、液位控制器；5、浮球式补水阀；6、进出口阀等组成。收藏指正
5.Close the drain valve and refill the tank, and restore power.
关闭排污阀，重新向内胆注水，重新恢复电源。收藏指正
6.Super percision fluid dispenser,parts(Syringe,nozzle,valve,tank and so on)and FAD system.
液体精密定量吐出装置系统及周边各种配套精密配件,如针筒,针嘴,点胶阀,压力罐等.收藏指正
7.Inspect whether there is material in reaction kettle 3, and close all valves after inletting, then open the heating system and inlet valve and emptying valve of recovery tank to distill for dehydration.
检查3号反应釜是否已经进料，进料后关闭所有阀门，打开加热系统和回收罐进料阀门.放空阀门，进行蒸馏脱水。收藏指正
8.When the fire breaks out, fire source may spread to the storage tank through the inlet, when the flame passes the small pore of the flame-resistant core layer in the respiration valve, due to the wall effect, the corrugating plate absorbs a great deal of heat, so as to increase heat loss at once, so that the flame is extinguished.
当发生火警时，火源有可能通过进入口向储罐内漫延，当火焰通过呼吸阀内阻火芯层的狭小孔隙时，由于器壁效应，波纹板吸收大量热源，使热损失突然增大，从而使火焰熄灭。收藏指正
9.When a reducing valve is used, it makes a closed system; therefore, a pressure relief valve must be installed in the downstream side of the regulator to protect equipment against excess pressure which is built up by the expansion of water from the domestic hot water supply tank or heater.
如果采用减压阀，将形成一个封闭系统；因此必须在调节阀的下游位置安装一个压力安全阀，以保护设备不会由于室内热水供应容器或热水器造成的水膨胀而变得压力过大。收藏指正
尝试查询
汉英释义