爱词霸英语   汉语   手机版   软件版下载 | English
每日一句:正在加载...
1.By studying different kinds of factors which affected the synchronization, the suitable experimental conditions for the operation of the pumping source have been obtained, and these conditions may be thought as the voltage of higher than 15kV, the pressure of 1-1.5 atm in the case of N2:Ar=3:7, the trigger voltage of higher than 30kV with the risetimeabout 10ns.
研究了各种因素对同步的影响，得到了泵浦源多通道同步及均匀放电适当的实验条件：氮氩混合气体总气压约1～1.5atm，气分比为N_2：Ar=3：7，充电电压大于15kV，触发电压大于30kV，前沿约10ns。收藏指正
2.The CMOS Schmitt trigger circuit with low voltage by the dynamic body-bias technology was presented.
提出了一种利用MOS管的体偏置技术实现的低电压施密特触发器电路 .收藏指正
3.Using the Digital Technology improves the performance traditional thyristor welding machine, according to the characters of the double inverse star from rectifier circuit, set the parameters with micro-controller accurately, design the dependable trigger circuit, lead the feedback of voltage for the operation program, so the voltage of main circuit be carried out very steadily.
摘要利用数字控制技术对传统晶闸管焊接电源进行改进，根据双反星型晶闸管整流电路的特点，采用单片机进行精确设定，设计了高可靠性触发回路，结合电压反馈进行程序运算控制，实现了主电路输出电压的精确调整和可靠运行。收藏指正
4.As far as the choice of the 1C is concerned, the PFC and PWM controller combo that is popular at the present time is chosen, because it can simplify designs and being synchronized trigger mode adopted, it can make peak to peak ripple voltage much small even on the condition of small capacitance.
在功率因数校正芯片的选择上，选用了国际上比较流行的PFC／PWM复合芯片，这种芯片不仅可以简化设计，而且由于采用上升沿／下降沿触发方式，在输出滤波电容很小的情况下依然可以得到很小的电压纹波。收藏指正
5.The principle of voltage linear digital triggering of thyristor by EPROM is described and it is discussed to solve the frequency disturbance on digital trigger by phase locked loop .
描述了用EPROM实现晶闸管电压线性触发原理，讨论了用锁相环解决数字触发的频率扰动问题。收藏指正
6.Based on the principle of random sampling of DSO in the time-domain, two ways (“time amplifying in dual slope integral” and “time?voltage convert”) are implemented to measure the time between the system trigger and writing clock.
根据数字示波器随机取样原理,用两种方法(双斜率积分时间放大测量方法和时间——电压转换测量方法)测量数字示波器系统触发和采样时钟间时间间隔。收藏指正
7.Delphi is adopted to program the whole software with assembly language embedded. Among them, Delphi is adopted to code user program, in which user can set test parameters, select test type and test voltage level, determine channels whether active or not to output trigger pulse. Serial port communication function is also included.
合成试验控制系统的软件采用Delphi嵌套汇编语言进行编写,其中,用户程序采用Delphi语言进行编写,可以用来设置试验参数、选择试验类型和试验电压等级、确定试验触发脉冲的通道或者进行串口通讯;收藏指正
尝试查询
汉英释义