various amplitude
3.The features and its reasons of annual variation of the earth resistivity(ρ_s)in Yangyuan station are ana-lyzed, and various possible reasons of the annual amplitude accrete of ρ_s after 1989 are discussed,suggestedthat the seismicity enhancement before and after Datong earthquake of M=6.1 is the principal reason of theannual amplitude accrete of ρ_s.
5.The clectroantennogram (RAG) responses of American cockroach Periplaneta americana to various volatile chemicals were investigated Of the 154 chemicals tested, about 53% elicited conspicuous EAG responses, mostly as negative deflections about 0.5-2.0 mv in amplitude with a time course of 1.5-3.0 seconds.
8.The amplitude values at a certain moment in a seismic record received at a shotpoint and a detection point might come from reflections of various points on an underground ellipsoid, which has the shotpoint and the detection point as its focuses, and the connected line of the shotpoint point and the detection point as its major axis.
9.Abstract: By using a counter and an operation microprocessor,this paper analyses the measuring method and designs an instrument of EDM sinking process in discharge state.This instrument takes samples of voltage,current signal and strong and weak of high frequency signals of detecting voltage amplitude,translates them into various time pulses in discharging state.And a counting unit turns these pulses into digital signals,then send them to a microprocessor.Finally various discharge time percentages are sent to the control tache.
10.By using a counter and an operation microprocessor,this paper analyses the measuring method and designs an instrument of EDM sinking process in discharge state.This instrument takes samples of voltage,current signal and strong and weak of high frequency signals of detecting voltage amplitude,translates them into various time pulses in discharging state.And a counting unit turns these pulses into digital signals,then send them to a microprocessor.Finally various discharge time percentages are sent to the control tache.

